# Quick Answer: What Size Does Timber Come In?

## How much does a 2×4 cost?

1x LumberBoardStud*10’2x32x4\$5.17\$7.652×6\$8.82\$7.65.

## What size is 3 by 2 timber?

Sizes may be the usual timber nominal size that the 3 x 2 inch Regularised Softwood is cut from, with a finished size that is generally obtained; 75x50mm Regularised Timber sizes can vary ±1mm on thickness / ±5mm on width, ± 20mm cross-cutting tolerance and there may be splitter saw cut-edges; This is the size …

## What is a 2×4 called in metric?

If you go to a lumberyard, you buy 48×98 as everything is measured in metric, but in the daily speach most people still use the term 2×4, 2×8 aso. The Inch measurement is in use as long as we speak about size on TV(40″) and cartyres (15″).

## How much weight can a 2×4 hold?

around 1,000 poundsHow much weight can a 2×4 support vertically? Assuming that the load is square and there is no wind, the average 8 feet 2×4 could handle around 1,000 pounds vertically. Of course, it’s wise not to push the material up to its limit, use brace and alike to secure the 2x4s whenever it’s needed.

## What is the common size of sawn timber?

Dimensions mean nominal sizes with the moisture content of the sawn timber at 20%. The most common lengths vary between 2.7 m and 5.4 m in steps of 300 mm.

## What size is CLS timber?

38 x 63mmCLS Timber (derived from Canadian Lumber Size), though used for the same application as a Scant, has a smaller radius on each of the four corners, making it both thinner and narrower. The finished size of a 50 x 75mm piece of CLS timber is 38 x 63mm.

## What are standard timber sizes?

Standard Timber Lengths Softwood comes in standard lengths of 1.80m 2.10m 2.40m 2.70m 3.0m 3.30m 3.60m 3.90m 4.20m 4.50m 4.80m 5.10m 5.40m 5.70m 6.0m and 6.30m. The Timber Merchant, in general won’t stock the smaller sizes and will prefer to sell the longer lengths.

## What does 2×4 timber mean?

DIMENSIONAL LUMBER: In the past, when a timber was called a 2×4 [or “two-by-four”], it actually measured 2 inches by 4 inches. … Instead, a 2×4 is really only 1 1/2″ by 3 1/2″. The same is true of pine. A 1×6, for example, actually measures 3/4″ x 5 1/2″.

## What is 2×4 wood in MM?

Lumber DimensionsNominalActualActual – Metric2″ x 4″1-1/2″ x 3-1/2″38 x 89 mm2″ x 6″1-1/2″ x 5-1/2″38 x 140 mm2″ x 8″1-1/2″ x 7-1/4″38 x 184 mm2″ x 10″1-1/2″ x 9-1/4″38 x 235 mm24 more rows

## What is CLS timber?

CLS timber is created from woods such as kiln-dried fir, pine or spruce. During the manufacturing process, it is planed, treated and shaped with four smoothed surfaced sides and distinctive rounded (or radiused) edges.

## What is finished size timber?

It’s a bit of a throwback to when timber merchants used to price and sell wood by volume. Therefore you’re paying for 22x150x2400 (rough sawn) which is then machined down to a nicely finished 18×144. Posted 5 years ago.

## What size is 2 by 1 timber?

2×1 PSE Scandinavian Whitewood ( ex 22x50mm; – Finished size : 44x18mm );

## What size is 4 by 2 timber?

44mm x 95mm4x2 Rough Sawn Timber – 44mm x 95mm.

## What is the difference between c16 and c24 timber?

Whilst C16 graded timber is strong enough for some applications such as wall plates, studwork, rafters, joists etc… C24 comes with added benefits. C24 timber has been graded to a higher standard than C16. It’s a premium piece of timber that can handle higher loads and wider spans.